close
close

Latest Post

Delta Math Answers Hack Geometry How To Get Animated Gifs On Iphone

Baofeng Uv-5R Chirp Settings. 2) connect the other end of the cable with your walkie talkie. Chirp allows you to select values up to 123, however anything much over 105 will not open the squelch.

Baofeng uv 5r repeater Car speakers, audio system
Baofeng uv 5r repeater Car speakers, audio system from avtotred.ru

Push the menu button again and either enter the tone directly using the keypad or you can cycle through all the tones available to find the one you need. Chirp daily build 02/02/15 or later increases the maximum squelch level value from 64 to 123. I was hoping to be able to listen to 800mhz range frequencies as that is what our local law enforcement use.

Here Are The Steps I Follow:

It can cover a multitude of channels and frequencies. Install chirp (daily build) 3. Communication at the retreat, off the grid, or on the farm is essential and does not have to be extremely expensive or overly complicated.

Chirp Daily Build 1/11/15 Or Later Includes The Ability To Set A Squelch Level Value Of 0 To 64 For Each Squelch Menu Setting.

2) connect the other end of the cable with your walkie talkie. If you would attache a debug.log file or a saved image from your radio, it would be easy to determine which one it is. Additionally, these hts cover a multitude of frequencies.

It Is Worth Bearing In Mind, These Files Also Change Radio Settings, Such As Beeps, Voice And Screen Colours.

Chirp allows you to select values up to 123, however anything much over 105 will not open the squelch. Buy usb cable for it (i found mine on ebay) and install using driver from miklor or the cd. That's because chirp is focused for ham radio and vfo settings.

Turn On Your Radio And Wait For Radio Activity To Stop (If Any) This May Take Several Seconds.

Don't change it, press enter. When the radio box opens select the com port your radio is. Chirp daily build 02/02/15 or later increases the maximum squelch level value from 64 to 123.

50 (This Is About 500 Ms, Which Is Important For These Radios) Persistence:

Frs (family radio service) gmrs (general mobile radio service) Chirp allows you to select values up to 123, however anything much over 105 will not open the squelch. Using chirp software, i was able to set the squelch settings to the settings below on the settings tab under service settings (as the picture shows.

Leave a Reply

Your email address will not be published.